EXPLORE MORE CATEGORIES
- Home
- ยป
- Our Products
- »
- Distribution Transformer
Distribution Transformer
Our product range includes a wide range of 200 kva three phase distribution transformer, 800 kva distribution transformer, 1600 kva distribution transformer, 160 kva distribution transformers, 400 kva oil-cooled distribution transformer and 250 kva three phase distribution transformer.
200 Kva Three Phase Distribution Transformer
Product Price: Rs 3,75,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Power | 200 kVA |
| Cooling Type | ONAN |
| Energy Efficiency Level | Level-2 |
| Mounting Type | Direct Mounting on tank |
| Insulation Class | A |
| AMC Available | No |
| Operating Temperature | 55 c |
| Core | CRGO M4 Grade |
| Rated Input | 11 KV |
| Winding | Copper |
| Winding Material | Copper |
| Rated Output | 433. Volts |
| Frequency | 50 Hz |
| Vector Group | DYN 11 |
| Phase | 3 Phase |
| Country of Origin | Made in India |
Additional Information:
- Item Code: VEWPLHT200
- Production Capacity: 200 KVA
- Delivery Time: As Per Customer Requirement
- Packaging Details: The material is packed in standard plastic foil from us. Actual charges will be extra if hard packaging is required.
Yes! I am InterestedRequest A Callback
800 Kva Distribution Transformer
Product Price: Rs 10,95,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Transformer Type | Distribution Transformer |
| Operating Temperature | 55 c |
| Brand | VIRDI |
| Frequency | 50 Hz |
| Phase | THree Phase |
| Power Rating | 800 KVA |
| Insulation Class | A |
| Cycles | 50 Cycles |
| Cooling Type | Oil Cooled |
| Energy Efficiency Level | Level-2 |
Additional Information:
- Item Code: VEWPLHT800
- Production Capacity: 800 KVA
- Delivery Time: As Per Customer Requirement
- Packaging Details: The material is packed in standard plastic foil from us. Actual charges will be extra if hard packaging is required.
Yes! I am InterestedRequest A Callback
1600 Kva Distribution Transformer
Product Price: Rs 18,65,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Cooling Type | ONAN |
| Energy Efficiency Level | L-2 |
| Mounting Type | Direct mounting On Tank |
| Insulation Class | A |
| AMC Available | No |
| Operating Temperature | 45 Degree C |
| Dimension | L 1320 x B 850 x H 1660 mm |
| Power Rating | 1600 KVA |
| Warranty | 1 Years |
| Vector Group | DYN 11 |
| Frequency | 50 Hz |
| Rated Input | 11 KV |
| Phase | 3 Phase |
| Core | CRGO M4 Grade |
Additional Information:
- Item Code: VEWPLHT1600
- Production Capacity: 1600 KVA
- Delivery Time: As Per Customer Requirement
- Packaging Details: The material is packed in standard plastic foil from us. Actual charges will be extra if hard packaging is required.
Yes! I am InterestedRequest A Callback
160 Kva Distribution Transformers
Product Price: Rs 3,40,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Cooling Type | ONAN |
| Energy Efficiency Level | Level-2 |
| Mounting Type | Direct Mounting on Tank |
| Insulation Class | A |
| AMC Available | No |
| Operating Temperature | 55 c |
| Dimension | L 1320 x B 1180 x H 1660 mm |
| Rated Input | 11 KV |
| Power Rating | 160 KVA |
| Frequency | 50 Hz |
| Rated Output | 433 Volts |
| Winding | Copper |
Additional Information:
- Item Code: VEWPLHT160
- Production Capacity: 160 KVA
- Delivery Time: As Per Customer Requirement
- Packaging Details: The material is packed in standard plastic foil from us. Actual charges will be extra if hard packaging is required.
Yes! I am InterestedRequest A Callback
400 KVA Oil-Cooled Distribution Transformer
Product Price: Rs 6,25,500 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Cooling Type | ONAN |
| Energy Efficiency Level | Level-2 |
| Mounting Type | Direct mounting on tank |
| Insulation Class | F |
| Phase | 3 Phase |
| Winding Material | Copper |
| Voltage | 415 V |
| Brand/Make | VIRDI |
| Frequency | 50 Hz |
Additional Information:
- Item Code: VEWPLHT400
- Production Capacity: 400 KVA
- Delivery Time: As Per Customer Requirement
- Packaging Details: The material is packed in standard plastic foil from us. Actual charges will be extra if hard packaging is required.
Yes! I am InterestedRequest A Callback
250 Kva Three Phase Distribution Transformer
Product Price: Rs 4,55,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Cooling Type | ONAN |
| Energy Efficiency Level | Level-2 |
| Mounting Type | Direct Mountain on tank |
| Insulation Class | A |
| AMC Available | No |
| Operating Temperature | 45 Degree C |
| Frequency | 50 Hz |
| Power Rating | 250 kVA |
| Core | CRGO M4 Grade |
| Winding | Copper |
| Rated Output | 433 Volts |
| Vector Group | DYN 11 |
| Phase | 3 Phase |
| Rated Input | 11 kv |
| Winding Material | Copper |
| Country of Origin | Made in India |
Additional Information:
- Item Code: VEWPLHT250
- Production Capacity: 250 KVA
- Delivery Time: As Per Customer Requirement
- Packaging Details: The material is packed in standard plastic foil from us. Actual charges will be extra if hard packaging is required.
Yes! I am InterestedRequest A Callback
315 Kva Three Phase Distribution Transformer
Product Price: Rs 6,10,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Cooling Type | ONAN |
| Energy Efficiency Level | Level-2 |
| Mounting Type | Direct Mounting on tank |
| Insulation Class | A |
| AMC Available | No |
| Operating Temperature | 45 Degree C |
| Core | CRGO M4 Grade |
| Power Rating | 315 kVA |
| Rated Output | 433 Volts |
| Vector Group | DYN 11 |
| Rated Input | 11 KV |
| Phase | 3 Phase |
| Frequency | 50 Hz |
| Country of Origin | Made in India |
Additional Information:
- Item Code: VEWPLHT315
- Production Capacity: 315 KVA
- Delivery Time: As Per Customer Requirement
- Packaging Details: The material is packed in standard plastic foil from us. Actual charges will be extra if hard packaging is required.
Yes! I am InterestedRequest A Callback
25 Kva Distribution Transformers
Product Price: Rs 58,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Cooling Type | ONAN |
| Mounting Type | Direct mounting on tank |
| Insulation Class | A |
| Operating Temperature | 50 Degree C |
| Dimension | L 530 x B 620 x H 1030 mm |
| Vector Group | DYN 11 |
| Power Rating | 25 KVA |
| Rated Input | 11 KV |
| Core | CRGO M4 Grade |
Additional Information:
- Item Code: VEWPLHT25
- Production Capacity: 25 KVA
- Delivery Time: As Per Customer Requirement
- Packaging Details: The material is packed in standard plastic foil from us. Actual charges will be extra if hard packaging is required.
Yes! I am InterestedRequest A Callback
2000 KVA Three Phase Distribution Transformer
Product Price: Rs 21,45,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Cooling Type | ONAN |
| Number of Phase | 3 Phase |
| Power (kVA) | 2000 KVA |
| Voltage Ratio | 11kV/433V |
| Energy Efficiency Level | L-2 |
| Mounting Type | Direct mounting on tank |
| Insulation Class | F |
| Operating Temperature | 55 C |
| Winding Material | Copper |
| Core | CRGO M4 Grade |
| Rated Input | 11 KV |
| Vector Group | DYN 11 |
| Standard | IS-1180 |
| Warranty | 1 Years |
| Rated Output | 433 Volts |
| Country of Origin | Made in India |
Core:
The core is made with laminated and low loss electrical steel sheets that are imported, grain oriented, cold rolled and sheets of high-grade steel. The cores are assembled in a manner that they reduce the noise caused by vibration; individual stamping is coated with insulation varnish which is resistant to heat and oil on both sides. The core is connected to the clamp which ensures that it is effectually earthed. The core legs are bounded with heavy-duty insulating tape. The yokes are rigidly and securely clamped between the folded steel channels. Clamps on top and bottom are firmly attached to each other by the means of tie rods. Tie rods serves the duel purpose of transferring the load from the bottom to the top clamps and securing the winding in place. This prevents tensile stress being setup in the core legs, which could adversely affect the iron losses.
Winding:
Transformer windings also known as 'Coils' are precisely designed to meet three basic requirements: thermal, mechanical and electrical. These windings wound concentrically and are cylinder shaped. Both H.V. L.V. type windings are wound with adequate securing and brazing tapes in order to get a sturdy, robust and self-supporting structure. It is provided with inter layer ducts which ensure low-temperature gradient between windings and oil so the hot spot temperature is kept to the minimum. This guarantees that the rate of insulation deterioration is lowered to attain high life expectancy.
Winding Connections:
Tapping and phase lead run in paper covered conductors. Adequate barriers are used to separate the phase leads from the tapping. Rigidly brazed tubes are used to maintain the required clearance from the coil to tank.
LV Leads, larger in cross-section, are usually sturdy and robust, where necessary supports are provided.
Insulation And Impregnation:
The principal component of insulation is insulating pre-compressed pressboard. The component like ring ducts dovetailed spacer; blocks etc. are put under compressing along with the coil assembly for preshrinking. The slight recovery in dimension after the preshrinking is compensated by providing additional insulation. This reduced the probability if coils getting loose during operation and also minimize the failure due to short circuit forces.
Short Circuit Capability:
In the order to prevent deformation under short-circuit forces; solid insulation end block and ring are used. Winding are compressed under top and bottom clamping members with the help of tie rods. The axial end thrust under fault conditions is minimized by the suitable balance of the ampere-turns over the length of windings. In a case of the bigger transformer, the HV tapping leads are taken out from two positions to balance the short-circuit forces in a much better way.
Tank Construction:
All tank are made from mild steel sheet of adequate thickness with corrugated wall panel type radiators of pressed steel fin/cooling tube for heat dissipation.
All tanks are checked by magma flux, ultraviolet ray dies penetrating system to ensure that there is absolutely no leakage from any part of the tank.
Quality Finish Through Use Of Shotblasting Technology:
Tanks are shot blasted to remove mill and welding scale and then a primer coat is immediately applied to the exterior to eliminate rust formation.
After priming, all tanks receive a coat of intermediate paint and after pressure testing; they receive a final coat of high gloss paint applied by spray. This ensures high coverage helping to combat corrosion in an inaccessible place.
Additional Information:
- Item Code: VEWPLHT2000
- Production Capacity: 2000 KVA
- Delivery Time: As Per Customer Requirement
- Packaging Details: The material is packed in standard plastic foil from us. Actual charges will be extra if hard packaging is required.
Yes! I am InterestedRequest A Callback
63 Kva Distribution Transformers
Product Price: Rs 1,10,000 / PieceGet Best Price
Product Brochure
Product Details:
| Cooling Type | ONAN |
| Mounting Type | Direct Mounting On Tank |
| Insulation Class | A |
| Dimension | L-700 mm x B-720 mm x H-950 mm |
| Power Rating | 63 KVA |
| Number of Phase | 3 Phase |
Yes! I am InterestedRequest A Callback
1000 Kva Oltc Transformer Level-2
Product Price: Rs 15,50,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Material | Copper |
| Cooling Type | Oil Cooled |
| Number of Phase | 3 Phase |
| Voltage Ratio | 11kV/433V |
| Vector Group | DYN 11 |
| Energy Efficiency Level | Level-2 |
| Warranty | 1 Years |
| Mounting Type | Direct mounting on tank |
| Usage | Healthcare Industry * Commercial Buildings *Data Centres * Heavy Industries.. |
| Frequency | 50 Hz |
| Winding Material | Copper |
| Standards | IS-1180 |
| Country of Origin | Made in India |
Core:
The core is made with laminated and low loss electrical steel sheets that are imported, grain oriented, cold rolled and sheets of high-grade steel. The cores are assembled in a manner that they reduce the noise caused by vibration; individual stamping is coated with insulation varnish which is resistant to heat and oil on both sides. The core is connected to the clamp which ensures that it is effectually earthed. The core legs are bounded with heavy-duty insulating tape. The yokes are rigidly and securely clamped between the folded steel channels. Clamps on top and bottom are firmly attached to each other by the means of tie rods. Tie rods serves the duel purpose of transferring the load from the bottom to the top clamps and securing the winding in place. This prevents tensile stress being setup in the core legs, which could adversely affect the iron losses.
Winding:
Transformer windings also known as 'Coils' are precisely designed to meet three basic requirements: thermal, mechanical and electrical. These windings wound concentrically and are cylinder shaped. Both H.V. L.V. type windings are wound with adequate securing and brazing tapes in order to get a sturdy, robust and self-supporting structure. It is provided with inter layer ducts which ensure low-temperature gradient between windings and oil so the hot spot temperature is kept to the minimum. This guarantees that the rate of insulation deterioration is lowered to attain high life expectancy.
Winding Connections:
Tapping and phase lead run in paper covered conductors. Adequate barriers are used to separate the phase leads from the tapping. Rigidly brazed tubes are used to maintain the required clearance from the coil to tank.
LV Leads, larger in cross-section, are usually sturdy and robust, where necessary supports are provided.
Insulation And Impregnation:
The principal component of insulation is insulating pre-compressed pressboard. The component like ring ducts dovetailed spacer; blocks etc. are put under compressing along with the coil assembly for preshrinking. The slight recovery in dimension after the preshrinking is compensated by providing additional insulation. This reduced the probability if coils getting loose during operation and also minimize the failure due to short circuit forces.
Short Circuit Capability:
In the order to prevent deformation under short-circuit forces; solid insulation end block and ring are used. Winding are compressed under top and bottom clamping members with the help of tie rods. The axial end thrust under fault conditions is minimized by the suitable balance of the ampere-turns over the length of windings. In a case of the bigger transformer, the HV tapping leads are taken out from two positions to balance the short-circuit forces in a much better way.
Tank Construction:
All tank are made from mild steel sheet of adequate thickness with corrugated wall panel type radiators of pressed steel fin/cooling tube for heat dissipation.
All tanks are checked by magma flux, ultraviolet ray dies penetrating system to ensure that there is absolutely no leakage from any part of the tank.
Quality Finish Through Use Of Shotblasting Technology:
Tanks are shot blasted to remove mill and welding scale and then a primer coat is immediately applied to the exterior to eliminate rust formation.
After priming, all tanks receive a coat of intermediate paint and after pressure testing; they receive a final coat of high gloss paint applied by spray. This ensures high coverage helping to combat corrosion in an inaccessible place.
Additional Information:
- Production Capacity: 1000 KVA
- Delivery Time: As Per Customer Requirement
- Packaging Details: The material is packed in standard plastic foil from us. Actual charges will be extra if hard packaging is required.
Yes! I am InterestedRequest A Callback
3-Phase 200kVA Oil Cooled Power Transformer
Product Price: Rs 3,75,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Type | Distribution Transformer |
| Cooling Type | ONAN |
| Number of Phase | 3-Phase |
| Voltage Ratio | 11kV/433V |
| Power Rating | 200kVA |
| Brand | Virdi |
| Energy Efficiency Level | Level-2 |
| Winding Material | Copper |
| Operating Temperature | 45 |
| Standards | IS-1180 |
| Country of Origin | Made in India |
Core:
The core is made with laminated and low loss electrical steel sheets that are imported, grain oriented, cold rolled and sheets of high-grade steel. The cores are assembled in a manner that they reduce the noise caused by vibration; individual stamping is coated with insulation varnish which is resistant to heat and oil on both sides. The core is connected to the clamp which ensures that it is effectually earthed. The core legs are bounded with heavy-duty insulating tape. The yokes are rigidly and securely clamped between the folded steel channels. Clamps on top and bottom are firmly attached to each other by the means of tie rods. Tie rods serves the duel purpose of transferring the load from the bottom to the top clamps and securing the winding in place. This prevents tensile stress being setup in the core legs, which could adversely affect the iron losses.
Winding:
Transformer windings also known as 'Coils' are precisely designed to meet three basic requirements: thermal, mechanical and electrical. These windings wound concentrically and are cylinder shaped. Both H.V. L.V. type windings are wound with adequate securing and brazing tapes in order to get a sturdy, robust and self-supporting structure. It is provided with inter layer ducts which ensure low-temperature gradient between windings and oil so the hot spot temperature is kept to the minimum. This guarantees that the rate of insulation deterioration is lowered to attain high life expectancy.
Winding Connections:
Tapping and phase lead run in paper covered conductors. Adequate barriers are used to separate the phase leads from the tapping. Rigidly brazed tubes are used to maintain the required clearance from the coil to tank.
LV Leads, larger in cross-section, are usually sturdy and robust, where necessary supports are provided.
Insulation And Impregnation:
The principal component of insulation is insulating pre-compressed pressboard. The component like ring ducts dovetailed spacer; blocks etc. are put under compressing along with the coil assembly for preshrinking. The slight recovery in dimension after the preshrinking is compensated by providing additional insulation. This reduced the probability if coils getting loose during operation and also minimize the failure due to short circuit forces.
Short Circuit Capability:
In the order to prevent deformation under short-circuit forces; solid insulation end block and ring are used. Winding are compressed under top and bottom clamping members with the help of tie rods. The axial end thrust under fault conditions is minimized by the suitable balance of the ampere-turns over the length of windings. In a case of the bigger transformer, the HV tapping leads are taken out from two positions to balance the short-circuit forces in a much better way.
Tank Construction:
All tank are made from mild steel sheet of adequate thickness with corrugated wall panel type radiators of pressed steel fin/cooling tube for heat dissipation.
All tanks are checked by magma flux, ultraviolet ray dies penetrating system to ensure that there is absolutely no leakage from any part of the tank.
Quality Finish Through Use Of Shotblasting Technology:
Tanks are shot blasted to remove mill and welding scale and then a primer coat is immediately applied to the exterior to eliminate rust formation.
After priming, all tanks receive a coat of intermediate paint and after pressure testing; they receive a final coat of high gloss paint applied by spray. This ensures high coverage helping to combat corrosion in an inaccessible place.
Additional Information:
- Production Capacity: 200 kva
- Delivery Time: As Per Customer Requirement
- Packaging Details: The material is packed in standard plastic foil from us. Actual charges will be extra if hard packaging is required.
Yes! I am InterestedRequest A Callback